Don't you just love this rig! And I haven't even got mine yet - very itchy fingers.
On 22/6/07 09:06, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> sent: > Message: 9 > Date: Thu, 21 Jun 2007 10:04:31 -0700 > From: wayne burdick <[EMAIL PROTECTED]> > Subject: [Elecraft] Re: K3 question: SWR monitor > To: DOUGLAS ZWIEBEL <[EMAIL PROTECTED]> > Cc: Elecraft Reflector <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > In addition to the SWR bargraph, which is available at all times when > transmitting, the SWR is shown numerically on the VFO A display during > TUNE (up to 99.9:1). Power in watts is shown on the VFO B display. > > The only time SWR is not shown during TUNE is when you're using the > 0-dBm transverter I/O (on the KXV3 module). In this case, we assume > that the device you're driving (a transverter) has low enough SWR. The > VFO A display shows the power level in dBm, and VFO B shows the power > in milliwatts (with .01 mW resolution). The transverter's power output > detector can be calibrated using a menu entry, as can the RF detector > in the main RF path. > > Wayne -- God could not be everywhere, and therefore he created mothers. -Jewish proverb _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
