I'm sorry, I didn't make myself clear. What is not saved is the state of the KDSP at power off (e.g. which filter has been selected, etc) of course all the configuration parameters are retained.
Doug W6JD -------------- Original message -------------- From: Lyle Johnson <[EMAIL PROTECTED]> > >> My K2DSP does not remember it's settings upon power-down. I can place it > >> in > >> bypass mode before powering down, but it does not remain in bypass upon > >> power-up. > > The KDSP2 does remember settings. Bypass is the exception. That is > because the DSP is powered down. It doesn't remember you want it to be > powered down when you power it back on, so it powers back on. If you > want it to be in bypassmode, you have to tell it so when you power it up. > > 73, > > Lyle KK7P > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
