I am about done with part 1 of the assembly of the KPA100 option. I opened the K2 and removed pin 4 from P4 on the control board per the instructions. Rather than connect the partially assembled KPA100 to the K2, I powered up the K2 first. Now the K2 doesn't initialize. Here are the symptoms: 1. I power up the K2. There is no visual indication the unit is powered up. 2. I turn the K2 off and power it on again. This time the LCD display shows ELECrAFt and stops there. There are LEDs lit on the S meter. I've double checked and am sure I cut the right pin. It is the header that connects to the KIO2 unit I think. The control board has been reseated and number of times to be sure. I didn't build the K2 and bought it used recently. So I don't know my way around the rig. I was hoping to finish the KPA100 option this weekend, but now I need to get the K2 working again. 73, Steve N6VL _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
