On 8/6/07, Igor Sokolov <[EMAIL PROTECTED]> wrote: > I have made brake up box for microphone/sound card connection with isolating > transformers. I find K2 to be pretty poor performer on PSK31. Has it > something to do with VFO stability of phase shift in the filters - I do not > know. But weak signals coming from my IC765 get easyly decoded by the > program while if I use K2 the same program can decode only solid signals. I > am not pleased with SSB performance of K2 either. Especially on TX. Having > said that it is pretty good as CW contest rig and is almost on the par with > my main radio. > > 73, Igor UA9CDC >
The K2 has been my only radio for many years and I have made more PSK31 contacts than any other mode and I find the performance to be excellent. I have never had any trouble decoding weak signals - except for the day to day variations probably caused by the ionosphere, especially in northerly regions - and find it gives a very clean signal on transmit, IMD products -34dB when I measured using another receiver. The only annoyance is the fact that the frequency jumps by a few Hz when switching filters due to the limited resolution of the VFO DACs. I have also had complimentary reports on SSB (and it has always sounded good when I monitor it, as well.) I wonder if there is some problem with the SSB alignment on your K2. Perhaps the radio is close to a magnetic field such as a transformer which is modulating the VCO a little. When I made a power supply for my K2 I had to use a toroidal transformer for this reason. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Ham-Directory: www.ham-directory.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
