N6KR wrote: "You can switch the KRX3 to its auxiliary input, but if you don't have a KAT3, the question is what to connect it to. The present KXV3 doesn't have provisions for routing RX ANT only to the sub. But there are three other sources you could use for the KRX3's aux input: (1) the SO239 at ANT2 (normally supplied only with the KAT3, but you could order one and install it just for the sub);"
If I am reading this correctly, I do NOT then have to order the KAT3 if I only want an extra rx antenna input to route to the subreceiver. And I can use the KXV3 rx ant input for the main rx with the ANT1 input for transmitting. This setup is for diversity reception with two rx antennas. ANT1 - transmit antenna KXV3 - rx antenna to main rx ANT2 SO239 (no KAT3) - rx antenna to sub rx Can someone please confirm this will be doable from the outset of K3 production? Thanks & 73, Barry N1EU _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
