JT,
No way! Wait until you have completed the K2 and use the method
described on the Elecraft website to accurately set the 4 MHz reference
using 10 MHz WWV or other accurately known frequency standard station -
follow that with a CAL PLL and CAL FIL to produce accurate dial
calibration on the K2. In the meantime, it is not critical, so just set
the trimmer cap to its mid-rotation position.
If you want more information about doing the Dial Calibration steps,
check my website http://w3fpr.qrpradio.com.
73,
Don W3FPR
JT Croteau wrote:
Anyone know if the frequency counter mode of the MFJ-259B is accurate
enough to do the 4 MHz Oscillator Calibration of the K2?
Thanks
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
