FS: PIC Programmer that has both a 9 pin serial port and USB port on board. Will program all the current MicroChip PIC's and is upgradable to add new PIC's as they are brought out.
Original cost in kit form was $49.95 plus $17.95 for the programmer and 40 pin ZIF (zero insertion force) socket and $17.95 for a universal power supply (Wall Wart) that will put out enough voltage (16-18 volts DC) to operate the programmer. The programmer is wired and tested and I'll also include a CD I created containing the proper software and the manual in PDF format. You can also download the same from the following website which is where I purchased this programmer from in the first place -- http://www.electronickits.com/kit/complete/prog/ck1708.htm The DIY kit software download required for this particular kit is diypack22.zip and the file will be included on the CD Total new cost of everything was $85.85 plus $7.50 postage for a total new cost of $93.95. I'll sell this one shipped with everything including CD for $75 shipped anywhere in the US and I'll throw in 3 different PICs (1 each of 16F628020P, 16F628A and a 16C745-I/SP). Anyone interested, contact me off list - [EMAIL PROTECTED] First "I'll take it" gets first crack at it. Jim - W0EB _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
