Hi I have a Paladin PAL 1645 tool that works on the small pins used in the speaker/counter probe connectors and also works on the larger pins used on the RF and 12V AUX connectors. I have had the tool for about 20 years. Digikey has them but they are now around $150
http://www.digikey.com/scripts/dksearch/dksus.dll?Detail?name=PAL1645-ND I have a selection of crimp tools for just about any connector I run across that I have acquired over the last 30 years. Red blue yellow barrel terminals, D-sub, Molex, Amp, Anderson PP, crimp RF connectors. I do not like to solder a crimp pin if I can use the proper tool to crimp the pin. The tools are expensive but last a lifetime. There are also some tools with interchangeable die sets. The ratchet handle is about $100 and the die sets are about $60 each. You may run across a tool at a swap meet at a good price. Don Brown KD5NDB ----- Original Message ----- From: "JT Croteau" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, September 02, 2007 11:05 AM Subject: [Elecraft] Proper Crimper > What is the proper crimper to use for the female pins (E620022) used > in Elecraft kits? Mouser part number would be wonderful. > > Thanks > > -- > JT Croteau, N1ESE - Manchester, NH > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
