I would like to use the K2 or the K3 occasionally as a "field strength meter", for example take the rig a couple of km/miles away from my QTH and record the signal strength from my home station. This would be useful in antenna experiments.
So, the question is: How much internal resolution of the S-meter reading do we have in the K2 or K3 (or other Elecraft rigs, for that matter), that could be read by a computer? For example, I have made calibration curves for my IC746, which gives me internal S-meter readings from 0 to 255, and I have made corresponding dB charts. It appears to me that the K2 gives only figures from 0 through 10 using the BG (Bargraph Read) command, which is too coarse for such measurements. Any further info on this - for the K2 or the K3? 73 - Kristinn, TF3KX _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
