Brett gazdzinski wrote:
I was looking at the K3 pix and have a few questions
while I wait the 7 days....maybe a field tester can clue me in...
What displays do you get when you press and/or hold the disp/meter
button? What does that button do?
Tapping the DISP button switches between displays in the VFO B area. So
you can see the VFO B frequency, or the time, date, voltage, current,
etc. Holding it is the METER function, which provides alternate displays
for metering, used for adjusting the audio gain and compression.
What is the cvp control?
If you mean CMP. This is the Compression adjustment for SSB.
Or maybe you mean the CWT button, that's CW Tuning, which provides a
display that shows you how close you are to zero beat on CW and how
close you are to correct tuning on RTTY. It also enables the CW autotune
function, which brings you to zero beat when you tap SPOT (I think this
will also be functional on RTTY, but it isn't yet).
What happens with the NB and NR buttons?
I assume a push turns them on/off, what does hold do,
what display changes do you get, options?
Holding allows you to adjust the various parameters that control the
aggressiveness, levels, and timings for the NB and NR functions. You
will also be able to select the analog (hardware) and digital (DSP)
noise blankers.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
