Right, thanks, I've ordered the 1.5" tilt bail, but thinking I may build a box to go under the XV144 and force air through it.
On 14/9/07 18:03, "John D'Ausilio" <[EMAIL PROTECTED]> sent: > I don't know that the XV432 fan is going to do you a lot of good. The > PCB on the '432 has holes cut in it to provide airflow through the > chassis while the others do not. Ultimately it's the bottom panel that > serves as the heatsink for the power amp module, so I'd think raising > it up and putting some airflow on that panel would be helpful. > > de w1rt/john > > On 9/14/07, David Ferrington, M0XDF <[EMAIL PROTECTED]> wrote: >> I have purchased an XV144 to go with my K3 (will arrive when it does). >> Having read some previous posts about FM and heat and installing a computer >> fan on the main board, I wondered if anyone could give me some info on the >> spec of the fan. I have a number of old 1GB SCSI drives in cases that I'm >> going to dump (unless anyone in UK want to make me an offer :-) and some Sun >> IPX/IPC stuff too (sorry, not meaning to use this forum as ebay), so >> probably have a suitable fan if I knew the spec. >> >> The alternative to that is to see in Elecraft will sell me the XV432 fan. -- Dear God, Did you mean for the giraffe to look like that or was it an accident? -Norma [Children's Letters to God, 1991] _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
