David,
It still works the same - tune the KAT3 (or KAT2) output that is to
connect to the autotuner into a dummy load on each band. Thereafter, do
not press TUNE when that antenna is selected.
If you need to provide RF to tune the external autotuner, reduce the
power if necessary and press the key.
I guess there is utility for a bypass mode on one antenna port for those
who use an external autotuner which requires RF power for tuning, but I
cannot think of any other instance.
73,
Don W3FPR
David Ferrington, M0XDF wrote:
I have an external SGC to a long wire, it tunes up on every band. I plan on
putting up some form of non-specific dipole so I only need to tune that.
Apart from not knowing if the KAT3 could handle the long wire, the tuner is
external to keep the RF out the shack. Therefore I would like to be able to
control tuning on the ANTs independently.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
