Hi Folks, I reported this problem back in the spring but didn't have time to act on it. Forgive me as I re-state the problem I'm having.
I have a K2 equipped with Don Wilhelm's constant audio volume mod for digital operation (hope I described it correctly, Don). I also use a Tigertronics SL-1+ interface between my K2 and my notebook. In LSB mode I'm able to transmit RTTY and PSK-31 without any problems. When I change the K2 to RTTY mode I get no transmitter output (receive works fine). The PTT indicator on the SL-1+ lights and the K2 receiver mutes, but there's no RF output indicated on the K2's meter or an external power meter. Cables and connections are fine, and as I mentioned, simply switching to LSB gets me back on the air. I don't get on the air as frequently as I'd like, and at times sitting down with the K2 and using it is like starting over from scratch. So, there's a good possibility that something's not set correctly. However, so far I haven't found a setting that would disable RTTY output like that. Can anyone help? Thanks and 73, Ken Alexander _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
