Hi, gang, I need your help. I just received a new MH2 mike from
Elecraft and intend it for eventual use on my third round K3 order. In
the meantime, I modified my K2 to use it -- the sheet included with the
mike provided instructions for doing so and I added the resistor across
pins 1 and 6 of the mike socket and use the header pins they provided.
All went tickety-boo. I used to use an old Icom hand mic which worked
very well but I was looking forward to being all Elecraft (I have an
Elecraft Hexkey, too!)
Well, darn if the thing is giving me trouble: it acts as if there's RF
in the system but the mike socket is grounded and it even acts that way
at low power; my watt meter shows approximately 40 watts of power when
the mike key is depressed on LSB but -- get this -- no power is shown
when it's on USB where it seems to work fine!
What should I check? Help!
Thanks...
73,
Joe, W2RBA
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
