Dom,
Look first for an unsoldered connection somewhere on the Control Board
or on the Front Panel Board (the control board is the most likely place
for the problem).
Often unsoldered connections can work for several years before they
develop enough oxidation to cause a break in what was only a mechanical
connection.
If you do not find anything unsoldered, start with DC voltage
measurements on the Control Board.
73,
Don W3FPR
f6dro wrote:
today I've got my first K2 problem after several years with no pb. I
have'nt open the box yet.
Symptom:
when powering the K2 , the elecraft text appears on the LCD , followed
by the frequency where it was used before I got the pb . No noise at
all in the AF , and no keyboard keys working , no S-meter
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
