hi Don, Don Wilhelm schrieb am 2 Nov 2007 um 19:01:
> I do believe the 1/2 watt designation is a typo - I have not seen a 1/2 > watt resistor as part of the upgrade kit. you are right, it is mentioned in the KAP100 Upgrade Instructions Errata. Rev. A-3 Dec. 4, 2006. I did not realise that there is an Errata document before. > Since you ordered the KPA100UPKT, > send an email to [EMAIL PROTECTED] and ask for the 0.22 uf capacitor that > is used at C31. This capacitor *should* be included with the KPA100UPKT, > but unfortunately is not yet added. When you have the new capacitor in > hand, remove the old C31 and use the .22 uf in its place. (the KPA100UPKT > tells you to update the schematic with the new value, but it provides no > other instructions. Where did you get this information? In my KPA 100 Kit C31 was 0.033 µV and in the latest manual and in the upgrade kit diagram it is also a 0.033 µV (33N). 73! Werner oe9fwv -- Ever stop to think, and forget to start again? Email powered by Pegasus Mail free at <http://www.pmail.com> Homepage: <http://www.qsl.net/oe9fwv/> Fone +43 5522 75013 Fax +43 820 555 85 2621 Mobile +43 664 6340014 Elecraft K2 #5203 _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
