While waiting for your K3s, I wonder if anyone could help with a K2
to MacLogger connect problem?
My K2, 3256 refuses to connect to my MacLogger program. About a
month ago a connection problem surfaced one day after several years
of reliable functioning.
The problem symptoms are: When "Radio VFO" box is checked, ML reports
Not Responding and Radio… No Data.
The system is:
K2 to Keyspan USA-49WLC serial to USB, into a MacBook Pro running
10.4.10 and MacLogger 4.3.2.b16
First, repair idea was to check in the K2 menu to ensure the Port is
"On"; it was. Then, attempted to fix via the following; downloaded
the latest Keyspan driver (2.4), tried different ports in the Keyspan
converter, tried different radio setup parameters for the KIO2.
Checked K2 operation with the KAT100 tuner which runs off the KIO2
interconnect cable, (KAT100 seems to function normally with the
KAT100). Not sure if this a meaningful test of KIO2 or not. Checked
KIO2 plugs for good solder joints and for opens or shorts at each plug.
Next, tried to a MacLogger connection with my K2 via an older
PowerBook G4 with MacLogger 4.3.2 and latest Keyspan driver 2.4 with
same "no go" results.
In desperation, replaced USB cable from computer to Keyspan
converter--no change.
Can anyone give me anymore tests or things to try to solve this
problem. I'm stumped at this point.
Thanks for any ideas,
Jack H. Shrawder, KT6JS
So Lake Tahoe, CA
"Success is the Only Option"
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
