When trying to download the K3 Assembly Manual with the following description, (8 MB) K3 Assembly Manual (Rev B, 10/28/07), I always get the 3.61 MB web version. Is the 8MB version being overhauled?
Stan Rife W5EWA Houston, TX K2 S/N 4216 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ed Muns Sent: Saturday, November 10, 2007 8:00 PM To: [EMAIL PROTECTED] Cc: [email protected] Subject: RE: [Elecraft] [K3] KRX3 & KBPF3 Question The KBPF3 mounts on the KRX3 just as it does on the RF board. The KRX3 is basically the RX portion of the RF board that mounts above the RF board, with enough space to clear the boards plugged into the RF board (KBPF3, KNB3, etc.). A KBPF3 can mount on either or both of the RF board and the KRX3 simultaneously in the same K3. 73, Ed - W0YK > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Saturday, 10 November, 2007 17:35 > To: [email protected] > Subject: Re: [Elecraft] [K3] KRX3 & KBPF3 Question > > I'm confused, the KBPF3 is a fairly large board that mounts > on the RF board and operates in bypass to the ham band only > BPF. Has anyone seen the KRX3 schematic or an image that > tells the full story? > > Al WA6VNN > > In a message dated 11/10/2007 3:23:21 P.M. Pacific Standard > Time, [EMAIL PROTECTED] writes: > If you have two KBPF3s. ;>) > > Ed > > Wayne Burdick wrote: > > > > Or both, if you want general-coverage receive on both. > > > > Ed Muns wrote: > > > > >> In the long run I plan on using the KFL3B-FM in the > primary RX and > > >> the KFL3A-6K in the secondary RX for listening to > > broadcast stations. > > >> Afaik this would require the KBPF3 to be installed on the > > KRX3 board > > >> and not on the main RF board. As a clone of the main > receiver this > > >> should be possible, shouldn't it? Did I overlook something? > > > > > > That is correct. The KBPF3 can be installed on either receiver. > > > > Wayne > > N6KR > > > > --- > > > > http://www.elecraft.com > > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > > > > ************************************** See what's new at > http://www.aol.com _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
