Andreas, Take a look at this WinKey document. It may help. In the meantime, experiment in small steps with the keying compensation and weighting. If running QSK, you can also try the 1st element extension.
If you're running a logging program like WriteLog or N1MM, they have their own WinKey setup screens that take over for the settings in Router. To see this, open the program and make sure CW keying is selected for WinKey. Then open Router, you will see all the settings are grayed out. That's because Winkey is now being controlled by the logging program. ------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 On Tue Nov 13 15:33 , Andreas Hofmann sent: >Let me clarify. The CW I am complaining is the K2 sidetone. The >Winkeyer(microKeyerII) does not have a sidetone; it is fed to the K2 key jack and the K2 is configured to Hand. The timing is just way off. The dits are really short, but playing with the parameters has not changed much. > >Just wondering if others use it this way and what parameters they are using... > >Andreas > > > >-----Original Message----- >From: Jack Brindle [EMAIL PROTECTED]','','','')">[EMAIL PROTECTED] >Sent: Tuesday, November 13, 2007 12:05 PM >To: Andreas Hofmann >Cc: [email protected] >Subject: Re: [Elecraft] Winkeyer sounds soo different than K2 > >This is an easy fix. Turn off the Winkeyer sidetone and turn on the K2 >sidetone. You still have to feed the Winkeyer into the K2's key jack, >and you are still using the K2's keyer, although only in handkey mode. >The K2 sidetone still works, so just use it. > > >On Nov 13, 2007, at 8:35 AM, Andreas Hofmann wrote: > >> Hi, >> >> I miss the sound of my K2 built in keyer now after setting up >> winkeyer (as part of microKeyer II). I am sure others have played >> with the settings and come up with some adjustments to make it sound >> more original again. Anyone would like to share them? >> >> Thanks and 73, >> Andy, KU7T >> _______________________________________________ >> Elecraft mailing list >> Post to: [email protected] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com > > >-Jack Brindle, W6FB >======================================================================= > > >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
