wayne burdick wrote:
If you have a K3 with the internal automatic antenna tuner installed
(KAT3), you can assign text labels to each of the two antenna jacks
(ANT1 and ANT2). Once you've assigned a label, tapping the ANT switch or
changing bands will briefly flash the antenna name. This serves as a
reminder of which antenna is in use -- especially useful for those of in
the 50 And Beyond club.
For example, if you have a triband yagi and a dipole connected to the
K3, you might name them "YAGI" and "DIPL".
I have a KRC2, which selects a yagi, dipole, or vertical. These appear
on ANT 1. I have a dummy load connected to ANT 2.
If the labels were per-band, then I would always know which antenna I
was using.
Just when you get a few free minutes...
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
