Hi Don, It receives great on 160. The band was really hopping last night.
I'll get back to you as soon as I figure out where this probe plugs in and where TP1 is. Thanks and 73, Ken --- Don Wilhelm <[EMAIL PROTECTED]> wrote: > Ken, > > Yes, that is bad - you have no output on 160 meters. > How about > receive? If it receives on 160 but not transmit, > that narrows the > search area down considerably. > > Check the frequency at TP1 with the internal probe > and CAL FCTR after > you have tuned the K2 to 1800 kHz. If you find a > frequency very far > away from 6715 kHz, the problem is with the VCO, and > most likely the VFO > Range Select section - C75 must be selected and of a > proper value (470 > pf) to tune 160 meters. > > 73, > Don W3FPR > Ken Alexander wrote: > > Hi Leigh, > > > > Receive (80 and 160m): approx 35 mA > > Tune (80m): 3.x Amps > > Tune (160m): approx. 50 mA > > > > This is bad, right? > > > > 73 - Ken > > > > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
