Greg, > There are no issues with bias on either mic connection.
That's may be the case if one is using an Elecraft microphone (or a computer headset in the rear panel). However, if one has a Heil or Kenwood electret wired to Kenwood's specification it will not work. The Heil/Kenwood will have a capacitor in series with pin 1 (Mic +) and a resistor to pin 5 (bias). The cap will block the Elecraft bias on pin 1 and fail to connect to +5/+8 on pin 6. 73, ... Joe, W4TV > -----Original Message----- > From: AB7R [mailto:[EMAIL PROTECTED] > Sent: Wednesday, December 05, 2007 10:41 PM > To: Joe Subich, W4TV; 'Rick Tavan N6XI' > Cc: 'Elecraft Reflector' > Subject: RE: [Elecraft] microHAM K3 cables ... > > > Joe, > > There are no issues with bias on either mic connection. The > operator can select bias to be on or off for both the FP and > RP mics. > > 73 > Greg > AB7R > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
