You could make your own using a eight pin receptacle, some cable and a eight pin plug.
You can find them all here: <http://www.therfc.com/micconn.htm> MP8MIL, inline male receptacle I believe would be the one you need along with the standard mike connector. The fastest would be to re-wire the Icom mike plug, not the most fun job either. I don't know of any adapters for the K3. 73 Dale Barry Simpson wrote: > > Is it possible to use an ICOM SM20 with the K3 ? > > > > Looking at the K3 manual the mic socket pinouts are different from the > SM20 > although there is bias available as used in the ICOM electret element. > > > > It seems to me that I will need to rewire the SM20 plug. Is there an Icom > to > K3 mic adaptor or is there any other way to use the SM20 without rewiring > the plug. I really don't want to sell the SM20 when I come to sell the > PRO3 > on purchase of the K3. > > > > Seasons greetings and 73 to all. > > > > Barry Simpson VK2BJ > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://www.nabble.com/Microphones-tp14346862p14349604.html Sent from the Elecraft mailing list archive at Nabble.com. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
