Any screen shots? - David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982
On Wed, 2007-12-26 at 19:16 -0700, cloud runner wrote: > Put the K3 on spectrogram today. As expected the CW filters are delightfully > clean. > > > > Now, the SSB filters. This was with 2.7 five pole filter. DSP set at 2.7 > khz, the filter is for all intents, PERFECT. Steep sides, very steep, and > absolutely level and flat top from one side to the other. You could see no > difference whatever between USB and LSB plots. It is by far the best plot of > SSB filter I have ever put on spectrogram. > > When it gets interesting, is when you narrow it up. When you dial the width > narrower, from 2.7 to, say, 2.1, it narrows from both ends. > > More likely want to put it in Hi cut / Lo cut mode for SSB, and narrow it up > by lowering only the side on which there is QRM that is causing you to want a > narrower filter in the first place. > > 73, Fred - kt5x > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
