Hi Eric,

The printing on the diode is not real crisp.  It looks like 1N5  then
358.    Is possible that 2 and 8/B (the last position on both lines
respectively) has a bad silkscreen?  The 8 could be either an 8 or a B
very easily. I talked to Scott last Friday and asked him to ship me a
new D3 and L15. I hope that they will arrive today or tomorrow.

Bottom line... the part in question was not clear. Support is sending
me a replacement to make sure that we are 100% certain on the part.
The support from the Elecraft has been great so this is NOT a big deal
in my book.

Thanks, JH



Eric Swartz - WA6HHQ, Elecraft wrote:
> CORRECTION - My last email was in error. (Our manufacturing department 
> misunderstood my question on this.)
>
> We are NOT shipping 1N5238 diodes in the XV222 kit.
>
> The correct part for D3 is the 1N5235B. We just checked and this is the part 
> for D3 packed in our current stock of XV222 kits.
>
> John - Could you be misreading the markings on the diode? The 1N5235B is 
> marked with "52" on one line and "35B" on the second line. ("B" as in "Boy") 
> It is possible you are reading the "B" as an "8". If not, let me know and 
> we'll get you the correct part.
>
> I apologize for the confusion on this.
>
> 73, Eric   WA6HHQ
> ----
>>
>> ====
>>
>> John Hoaglun wrote:
>>> Hello fellow builders:
>>>
>>> I am building an xv222 transverter. The last step on page 28 is to
sort 13 diodes.
>>> 1 - 1n5235  (D3)
>>> 2 - 1n5711 (D7,D8)
>>> 10 - 1n4148 (D1, D2, D3, D13, D6,D12,D9,D14,D15,D16)
>>>
>>> I don't have a 1n5235... but there is a 1n5358 in the parts bag.
All of the parts match except for this one diode. Is the 1n5358 a
replacement/equivalent part?  I don't see this listed in the errata
notes nor can I confirm/deny on the internet that they are
interchangeable parts.
>>>
>>> Please respond to the list and cc me directly. (I get the digest
version of the list so I might not see the response... or in a timely
fashion.)
>>>
>>> Thanks, JH
>>>
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to