Problem solved. I Just removed the KIO2 and the KXV2, tested the K2 (all OK) reinserted the KXV2 (all OK) and finally reinserted the KIO2 (all OK) Magic hands I suppose :-).
Have a nice weekend. 73's, Evert PA2KW >>>> After installing my KIO2 module in the K2 (I want my KPA100 remote) I did all proposed tests to see if the KIO was working. I was using the K2-remote program " C 2001 Elecraft LLC " and changing settings on 7 Mc. All looked fine, and up to the end. I finally completed the mechanical procedure and was ready for a real life test. I noticed that only my 7MC band (receiver) seems to be dead or deaf. >From all bands I can get power (10W) into the dummy except for 7 MC where it stops with 0.1 W. It just looks like the remote control program messed up something, but what? No idea. I do have the KXV60 installed as well for the 144 Mc / 28 Mc transverter job. >>>>>> _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
