All:
MANY responses - most like the idea, but do not like the additional current
draw. For a KX1, the current should be nil (if possible!); for the K1 (and K2
and K3), I (me-own-self) am willing to 'take the hit' of a few more mA. If it
is an *option* (like the KDSP2), you can add it - or not - at home, use it with
mains power, remove it for field use on batteries.
And, as suggested, an 'outboard' device might be the answer (in the 'mean
time').
Just my $.02 (BTW, what is that in EU's?)
Thanks for all the responses... I have a lot more research to do.
-Matt W0XEU
>>> "Kurt Pawlikowski" <[EMAIL PROTECTED]> 1/10/2008 1:26 AM >>>
Hi,
Besides the "current" issue, has anyone used this device? My limited
experience with audio DSP's (GAP's "Hear It" inline module) is that they
work reasonably well for moderate to strong signals. But, when you get
into the low signal strength area and high noise, the seem to "cut out"
parts of the signal. Moderate and strong signals are okay.
Any comments?
Regards,
kurtt
Kurt Pawlikowski, AKA WB9FMC
The Pinrod Corporation
[EMAIL PROTECTED]
(773) 284-9500
http://pinrod.com
Benny Aumala wrote:
> To have a DSP Noice Reduction and AF-filter
> in K1 you might put this Low Power Board inside K1:
>
> http://www.sgcworld.com/ADSPProductPage.html
>
>
> Benny oh9nb
>
> _______________________________________________
> Elecraft mailing list
> Post to: [email protected]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
