Thanks for all the reflector's input in resolving this issue. P1 on the KSB2 board needed to be re-flowed and the rig is back to perfect. Special thanks to Don Wilhelm for nailing it. I don't think he ever sleeps! ;-)
73, Bob K5WA Bob Evans wrote: > My K2/100 has been working great for the year and a half (except for a > bad power cord once) since I built it, but it just recently presented > me with a perplexing problem. Since I don't get on SSB very often, I > don't know how long this has been an issue, but the symptom is that > when I start transmitting in SSB, power is OK for about 3-4 seconds > and then power shuts down to zero on both SSB and CW. When I remove > the SSB board and install bypass jumpers (and recommended capacitor), the rig works perfectly in CW. > When I reinstall the SSB board, same problem; i.e. 3-4 seconds of good > SSB power and then power shuts down to zero. _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
