Alan -
I have used PSK31, MFSK16 and RTTY using Hamscope with no problems.
However,
the rear panel LINE IN (mono) and LINE OUT (stereo) jacks are 3.5mm,
NOT the
old trusty 1/8 inch (they are slightly larger). I initially used
some 1/8" plugs I had, and they worked, but were
loose and prone to poor connection. I ordered 3.5mm plugs from
Mouser and they fit FB.
- Bill
K4DXU
Lyle replied to Alan:
Message: 13
Date: Mon, 14 Jan 2008 15:16:17 -0800
From: Lyle Johnson <[EMAIL PROTECTED]>
Subject: Re: [Elecraft] K3 Line-In for PSK31 not working
To: [email protected]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I was going to use VOX instead of a physical PTT, but that doesn't
work
well. I've adjusted gains but it insists on cycling on & off. Thought
anti-VOX would fix, but it doesn't.
Please check your cable and verify it is firmly seated into the K3 LINE
IN connector. I routinely use LINE IN with VOX in DATA A mode to
operate PSK31 on my K3 with no problems.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
