Thom,
The power supply used here for several years with rigs of similar power
output as the K3/100 is a Diamond GSV-3000, which is a 'linear' type (large
transformer!) not switching.
Input : 230v AC 50 Hz (There is a version for your line voltage @ 60
Hz)
Output : 1 to 15V DC, adjustable using a front panel control. 30 amps
continuous at 15V, 35 amps maximum (CW/SSB)
Two auxiliary outputs rated at 6 amps.
Meters : Two - DC Voltage supplied and DC Current drawn.
Cooling : Fan, VERY quiet if you can hear it.
Physical : Colour - black. Weight - 9 kilograms.
Dimensions - 15 x 25 x 25 cms (H x W x D).
My K2/100 sits right alongside the right hand side of this supply separated
by roughly 2 inches, and the K2's VCO without the VCO mod kit is not
affected by this power supply.
The usual disclaimers apply.
73,
Geoff
GM4ESD
Thom LaCosta <[EMAIL PROTECTED]> wrote:
Looking for suggestions for a power supply for the K3/100
The only thing I have handy(well, if I can get them upstairs) are some
sealed lead acid batteries from motorized carts.
I have a few that are 34ah and at least one that is 55ah and one of the
chargers that autosenses battery charge level.
Seems to me this should do the job, but I've never run a 100 watt rig on
batteries, so I really don;t know.
thanks in advance for suggestions.
73,
Thom k3hrn
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
