John,
Since you have the resistor in the connector, it will work fine with the
K3 - BUT - the mic bias will be coming from the resistor in the mic
itself - for that reason, do not turn the K3 microphone bias on.
Others using those same microphones with the K3 would want to turn bias
on because they have no resistor in the connector body.
73,
Don W3FPR
John Huffman wrote:
For my K2 I use the MH2, MD2, and a Heil Proset. For flexibility,
instead of putting the 5.6k resistor in the K2, I put one each in the
microphone connector shells of the MH2 and MD2.
I have ordered my K3 and expect it in 2008, so I want to be ready.
Will I need to remove the resistors from the mic connector shells of
the MH2 and MD2 in order to use them with the K3?
73 de K1ESE
John
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
