Hi Charles,
You might want to try <[EMAIL PROTECTED]> (or
<[EMAIL PROTECTED]>) for numbers one and two.
Concerning #1) Do you have NR turned on when you hear the bursts?
There was a problem with this several firmware revisions ago.
Concerning #2) Here in Europe I have not noticed anything like this,
and there are medium and short wave transmitters roughly 4 to 5 miles
from our club station, where I usually have my K3. Are you sure that
these products are being produced in your K3 and, for example, not by
oxidized connectors or the like?
Do not know how to adjust the manual notch.
It's in the manual, page 24: Hold MAN to adjust the manual notch frequency
using VFO B. This also selects manual notch.
Auto SPOT seems not to work every time
My experience is, if a signal is not strong enough or if there is more
than one signal audible then it does have problems auto-tuning.
vy 73 de toby
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
