> > Here is a solution from a very old QST, > > It's not from QST. > > and all I can say is it works > > > > for me. My shack is on the 2nd floor and I run several rigs w/ amps . I > > was having RF everywhere until I tried this: > > - Run coax ( RG-8 or similar) from rig to a real good ground . Put a > > .01 cap across the shield and center conductor at both ends. Cap needs > > to be 2KV or better. You will be using the center conductor as your > > connection to rig and the ground rod.You should also use an ATU as > > mentioned in an earlier reply.
If it is not from QST, do you know where it is from? Do you know where (or how) I can get a reprint of it? My shack is on the second floor, too. And I believe that The Wireman used to sell a kit containing the capacitors! Dan Allen KB4ZVM K2 S/N 1757 _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com