I have been doing this with no problems using an MK2R+. It does load a bit slower than a native COM port, but its still fine. I changed the radio port as Joe mentioned and just saved that as one of the presets "K3 Firmware". So I just click the preset before uploading the FW.
------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 On Thu Feb 21 7:19 , "Joe Subich, W4TV" sent: > >> Can the Microkeyer II USB interface be used to upload >> firmware upgrades with the K3? > >Yes. However you must first open Router and set the Radio >type (Radio Port | Set) to "None" or check "Disable router >queries" to prevent Router from trying to poll the radio >during the upload. > >73, > > ... Joe Subich, W4TV > microHAM America > http://www.microHAM-USA.com > http://groups.yahoo.com/group/microHAM > [EMAIL PROTECTED] > > > > > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [EMAIL PROTECTED]','','','')">[EMAIL PROTECTED] On Behalf Of John Gaynard >> Sent: Thursday, February 21, 2008 12:43 AM >> To: [email protected] >> Subject: [Elecraft] K3 with Microkeyer2 >> >> >> Can the Microkeyer II USB interface be used to upload >> firmware upgrades with >> the K3? >> >> John K8WDN >> K3 S/N #157 >> > >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
