Joe Many thanks for the tip. The K3 Firmware updater is now working correctly through my Microkeyer 2. I have added a new profile in the router to make it even quicker in the future! 73 Peter G3ZSS
-----Original Message----- From: Joe Subich, W4TV [mailto:[EMAIL PROTECTED] Sent: 21 February 2008 15:30 To: [EMAIL PROTECTED]; [email protected] Subject: RE: [Elecraft] RE: K3 with Microkeyer2 Disable router queries or set the radio type to "none" before initiating an upload. At least two of the K3 beta test team have microHAM devices and perform uploads through them. 73, ... Joe Subich, W4TV microHAM America http://www.microHAM-USA.com http://groups.yahoo.com/group/microHAM [EMAIL PROTECTED] > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Peter Bacon > Sent: Thursday, February 21, 2008 5:25 AM > To: [email protected] > Subject: [Elecraft] RE: K3 with Microkeyer2 > > > I have tried unsuccessfully to upload K3 firmware upgrades > via my Microkeyer > II and use the KUSB cable instead. I have my Microkeyer > talking to the K3 > at 38400 bps all the time. I found that I would get part way > through a > firmware upgrade and then it would hang up. I recommend you > stick to the > KUSB. > 73 Peter G3ZSS > > > Message: 40 > Date: Thu, 21 Feb 2008 00:43:03 -0500 > From: "John Gaynard" <[EMAIL PROTECTED]> > Subject: [Elecraft] K3 with Microkeyer2 > To: <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="US-ASCII" > > Can the Microkeyer II USB interface be used to upload > firmware upgrades with > the K3? > > John K8WDN > K3 S/N #157 > > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
