Roger - K8RS Hi Roger,
You can not, and never could, send FSK when Data is set to Data-A. You need to HOLD the Data MD button and then select FSK-D, not Data-A. Data-A should be used for audio based data modes like PSK (if not using PSK-D), SSTV, MFSK...etc. Don't forget to set your pitch to match what MMTTY is using. Do this with the same PITCH control you use when in CW mode. ------------------------- 73, Greg - AB7R Whidbey Island WA NA-065 K3#0009 and 0319 On Thu Feb 21 10:56 , "Roger Stimson" sent: >Group, > After the recent firmware update I am no longer able to send or > receive RTTY. A few weeks ago I experimented with WriteLog and RTTY with excellent results. Now I cannot generate any RTTY output nor receive RTTY in Data Mode A. What is going on? I am using the same setup I used a few weeks ago: FSK input to pin 1 of the AUX/IN jack along with PTT IN. WriteLog looks like it is generating the FSK, i.e. the MMTTY display is giving me the two ellipses. Everything seems normal on CW and SSB. > Roger K8RS >_______________________________________________ >Elecraft mailing list >Post to: [email protected] >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
