Yes, Bjorn,
it is marginal but when you plan to replace all 897 around used as I/F
for microwaves... :-)
Seriously - I know several other mostly UHF/SHF contesters - this is
iportant function for them -- and they did not sent order for K3 yet ;-)
73!
L. -dst-
Björn Mohr napsal(a):
This is something I liked with my FT-897, I think it is a good idea but
probably not the highest prio on my list.
73 de Björn /SM0MDG
On 080223 12:41 , "Alexandr Kobranov" <[EMAIL PROTECTED]> wrote:
Hello all,
is there some support for request for "AUTO CW ON/OFF" firmware
function as some rigs are having (FT-897)?
It means SSB mode choosed, RX in SSB mode normally but when Key is
activated (touched for CW sending) there is automatic shift of carrier
and CW is transmitted (as in standard CW mode, SEMI or FULL-BK etc.)
then going back to SSB mode for RX. Hope you understand :-)
This is very useful during UHF/SHF contests (with transverters) when
calling CW CQ but takers are calling in SSB (mostly or very often). No
need for switching mode (you have SSB all the time) and to touch dial
knob to reply etc. Very comfortable and (I hope) not so serious for
firmware.
I know this is very special and on HF bands there is probably no
reason for such function, my experience is based on serious contesting
on higher bands (1296 and up).
If this is already somewhere inside and I missed something and my
sorry for this Q.
73!
Lexa, ok1dst
K3 ????
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
