I had similar (lack of) luck with Hyperterm, TeraTerm, and TinyTerm on Windows Vista with a USB to Serial adapter (I tried several). So I'm building a terminal page into the K3 Utility.
Dick, K6KR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Fleming Sent: Sunday, February 24, 2008 3:09 PM To: Kenneth A. Christiansen; [email protected] Subject: Re: [Elecraft] K3 Send and receive data on a terminal program? Hey, I remember Mirror! I used it for years. I'm pretty sure DOS doesn't support USB. So the KUSB won't work on DOS. You'll need a "real" serial port. But Hyperterminal running on Vista should work. Are you selecting the correct COM port in Hyperterminal? David, W4SMT --- "Kenneth A. Christiansen" <[EMAIL PROTECTED]> wrote: > I have been using K3 0047 and having lots of fun. I > have the KUSB from > Elecraft and it works fine with MixW and Ham Radio > Delux. > I have Vista on my computer and had to download a > copy of HyperTerminal > from the internet. I can not get any commands to go > to the K3 from > HyperTerminal and I can not see any data from the K3 > on HyperTerminal. I > got out an old DOS computer with an XTALK clone > called MIRROR but I was > not able to get it to send or receive data either. > Has anyone else been > able to get this feature to work. If you have can > please share settings > for both the K3 and the terminal program that I need > to use. I already > tried setting both terminals for 38400, 8 bits, no > parity and 1 stop bit > and the K3 is taling to MixW and Ham Radio Delux > with these setting. > Thanks for any help. > I used the K3 on the 160 meter SSB net this morning > and found I could > work stations that I could not hear with the > IC-746PRO. The audio also > sounds much nicer to my ears. I am using 20 for MIC > gain and 20 for CMP. > Everyone told me it sounded better than the IC > 746PRO so it must sound > good as I have had good luck for 4 years with the IC > 746PRO. I also used > it on an AM net on 160 with good results both > transmitting and > receiving. I used the same MIC gain 20 and CMP gain > 20. > > 73 for now. > Ken W0CZ > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
