John:
I see that Greg responded directly to you on this.
161,
Tom
----------------
Thanks for catching this John. We had another report of this today and the
manual will be corrected in the next revision.
Pin 6 should be listed as not used. Pin 7 should be the RTS pin.
Don...Could you put this on the Wiki also?
Thanks
73
Greg
AB7R
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Silva N3AM
Sent: Monday, March 03, 2008 7:26 PM
To: [email protected]
Subject: [Elecraft] K3 RS232 Pin Assignment Error?
Page 18 of the K3 Owner's Manual (Rev C1, Nov 18, 2007) designates
RS232 pin 6 as RTS, but the EIA standard says pin 6 is DSR, and pin 7
is RTS. Is this an error in the manual?
John N3AM
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
