It normally takes between 2 and 5 minutes to load both the MCU and DSP1 firmware. It's slightly faster with a "real" serial port than with a USB to Serial adapter.
There is a row for the DSP2 which is related to the KRX3 Second Receiver Option. The "Installed in K3" column should show "N/A" unless the KRX3 2nd receiver option is installed and enabled through the CONFIG menu. The K3 Utility Help has a description of the Firmware page, section by section, and there is a Help index entry for DSP2 (and DVR) that describe what they're for. 73 de Dick, K6KR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lee Buller Sent: Tuesday, March 04, 2008 10:55 AM To: Elecraft Reflector Subject: [Elecraft] K3 Updates Did my first update ot the K3 firmware last night. I was surprised how long it took. About a minute for the Rig and about 4 minutes for the DSP unit. Question...there was another file DS2 or something like that. Is that for the sub RX when it is installed? Lee K0WA 443 In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
