To move between RTTY and PSK31...you have to change (for example) between AFSK
A and DATA A. (Using AFSK...would be different for FSK)
You can do AFSK-based RTTY (AFSK, PSK31, Throb, Pactor - whatever) by
using DATA A.
The K3 AFSK mode is a special case of DATA A in that the frequency
display is tied to the tone pair selected on the K3, and the internal
RTTY decoder is active. If you are not going to use the internal
decoder, you can use DATA A for all soundcard-based modes.
Does the Filters track with the Data Mode?
In DATA A mode, you have to use the shift/width or lo cut/hi cut
controls to adjust the selectivity. Or tap XFIL.
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
