I am just getting back into enjoying my K3 #328 after a hospital stay, and am confused by one aspect of the output power measurement. I suspect the problem lies with me rather than the radio, but I feel it is worth asking the question.
Suppose I set the power output using the PWR control at 30W. When I hold TUNE both the radio and the external power meter indicate an output of near enough 30W. However, if I transmit in PSK or RTTY both the radio and the external power meter indicate around 10W. In particular, I seem to be unable to get more than around 50W output in PSK or RTTY. I am fairly sure that I was able to obtain a full 120W in these modes when I first used the K3. The only change is that I have recently upgraded to the latest versions of the firmware and DSP, without any apparent problems. I would be most grateful for any advice. -- 73 Chris, MØPSK _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
