Hi I am kitting another batch of my Solar Controller Kits. There are two versions, a high power and a low power. The low power is good for about 40 watts or about 2.5-3 amps and sells for $20. The high power version can handle up to 200 watts or about 15 amps and sells for $30. The kits include a circuit board and all parts required to build the controller. You will need to supply a box to mount the controller into or install it into your battery box. This controller works with a flooded lead acid or sealed lead acid (gel cell) with a current rating of 2 to 100 amp hours. Solar panels of 3 to 40 watts for the low power and 2 to 200 watts for the high power can be used with these controllers. The controller is an analog design and does not generate any RF or switching noise. Order from : Don Brown KD5NDB 19132 Falls Creek Drive Flint, Texas 75762 Check or MO only Thanks Don_______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
