WILLIS COOKE wrote:
I have used the Melamine coated board on bench tops in
the past. It is easy to clean and does not absorb
water or chemicals easily. It is a little more
expensive, but can last for years and looks quite
nice. I cut it to size and hold the corners in place
with small nails.
This is what I used, but I attached it with double-sided tape because
the table that it is on has a nice surface that I didn't want to damage.
I attached an aluminum yardstick to the front (also with double-sided
tape). This comes in handy for cutting wire to length, but it's also
connected to ground via a 1 meg resistor. My wrist strap and a couple of
alligator clips are similarly connected.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
