Hi Franki,
As of my knowledge therre is no european dealer fpr Anderson PP. I order mine in the US and do not crimp them but solder them. In this way you can use them again if you have to and i do like the solder more as crimping. There is a lot of discussion whatever is better: solder, crimping or both but solder is OK for me and I had never any losses or trouble with it. 73 de Tom HB9DOD KL5X > Hello group > > Awaiting my K3, I am preparing the transistion from TS-850 and anticipate > on > buying a compact SMPS. > I see that the power connection is an Anderson PowerPole receptacle. That > type of connector is not common here in EU or at least in Belgium. > Is there a mating male part supplied to fit the cable from the PSU? There > is > a German (ham) distributor for these things but a crimp tool costs 66 Euro > (approx 100$) which is a silly investment to crimp only one connector. > Is there an alternative way of crimping or fitting the PowerPole? > > Thanks for info / advice. > 73 de Franki ON5ZO > http://on5zo.spaces.live.com/ > > _______________________________________________ > Elecraft mailing list > Post to: [email protected] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
