Hello All: I'm really enjoying my new K3 #616. I've been getting everything hooked up and exploring all the possible solutions to typical problems. Here's one that I haven't seen answered here -
To run RTTY with MMTTY requires use of the one Com port on the radio unless you choose to use VOX control. This works quite well until something like an APRS burst kicks in and sends the transceiver into transmit ! If you run a logging program - mine is LoGic 8 - it uses the Com port to control the radio or just put in the frequency information when you make a contact. Running BOTH programs takes 2 com ports. Now, if I use a program like MixW, this CAN use one Com port is you stay with AFSK. I have not yet run a cable for FSK to a separate Com port. Is there any slick way to avoid the Com port conflict ? I DO plan on upgrading my interface situation with a microHAM device, so this is probably an academic question. I would just like to hear what others have figured out ! :) 73, Jamie WB4YDL _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
