My K3 (just received) came with a note that said to download the
latest firmware before using it.
Config menu says uC 1.78 / FW REV 5
I got through most of the process, but it won't finish. Here is the
report from the K3 Utility:
08:47:53 K3 boot loader is ready for MCU firmware load. RS232 38400 bps.
08:49:08 K3 boot loader is waiting for MCU firmware load.
08:51:18 Connecting to ftp.elecraft.com. Please be patient, this takes
a few seconds.
08:51:29 Connected to Elecraft server.
08:51:41 Copying files to "Windy HD:Users:windy:Library:Application
Support:Elecraft:K3 Firmware:"
08:51:53 "hmcu0178.hex" verification succeeded
08:51:58 "TBOOT7.HEX" verification succeeded
08:52:09 "HDSP0158.HEX" verification succeeded
08:52:19 "HAUX0155.HEX" verification succeeded
08:52:36 "DTBL0008.HEX" verification succeeded
08:52:42 Copied "K3UtilityVersionInfo.txt" from Elecraft
08:52:48 Copied "hfwnotes.rtf" from Elecraft
08:52:48 Copied 7 files from Elecraft to "Windy
HD:Users:windy:Library:Application Support:Elecraft:K3 Firmware:"
08:52:50 K3 boot loader is waiting for MCU firmware load.
08:52:50 Ready
08:54:42 K3 boot loader is waiting for MCU firmware load.
08:59:16 K3 boot loader is ready for MCU firmware load. RS232 38400 bps.
That's as far as it will go after pressing "Send All New Firmware to
K3".
I'm using the KUSB adapter between my Mac (with current OSX) and the
K3. K3 is turned on. I don't see any clues in any instructions about
anything else I'm supposed to do.
It's Saturday, so the factory isn't open.
?
Windy
K3 S/N 764
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
