John,
I seriously doubt that plugging a mono plug in the K2 key jack would
cause any damage - although the K2 would do strange things while the
mono plug was inserted.
To check it out, plug a bare (no wires attached) stereo plug into the
key jack. If you then get a constant carrier, look for a problem with
the K2, but if the K2 behaves normally (no keying), look for a problem
between your external keyer and the K2 - I would start by checking the
wiring for your new stereo plug.
73,
Don W3FPR
John Klokis wrote:
John K3JK here, Would someone give me some feedback on my K2? I plugged a
mono plug into my keyer jack when I was using an external keyer. I might have
shorted a resistor or diode. now as soon as i plug the keyer in with a stereo
plug, i get a constant carrier. When I had the mono plug in the keyer jack, i
keyed the rig once. Could I have blown shorted something in the keying circuit?
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
