Chris,
What exactly do you mean by #2. If BAND+/- is 'skipping' a band, then
that is an indication that you may have tuned WITH THE VFO to the next
band. The K2 will *not* change bands when you turn the VFO (even though
the display may have the correct frequency indicated).
If you have created that condition by tuning from one band to the other
with the VFO, then the way to get things back to normal is to do a
Direct Frequency Entry for each band in question (or just do it for all
bands to be certain they are all correct).
Such a situation *could* explain you bandpass filter tuning problems on
80 meters and 17 meters too.
73,
Don W3FPR
MTcja wrote:
1. Larger than expected changes;
2. BAND +/- skips band and have to manually tune to frequency or remains on
same freq;
3. When aligning 17m adjusting c32/4 does not change power indication.
Indication will flicker up or down by .1 watt.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
