Ok, I went back and played with it, and if I put it in Line In, and
rpl, I then had to adjust the 'line in / mic gain' to about 40 and it
kicked in. Thanks.
Dave Wilburn
K4DGW
K2/100 - S/N 5982
K3/100 - S/N 766
"For those who fought for it, freedom has a flavor the protected will
never know."
Lyle Johnson wrote:
I have done all of these, but I cannot get the line in to go into
transmit using VOX.
I just checked this. If I have sufficient LINE IN to drive the ALC to 4
or 5 bars, the VOX works as expected. I verified in DATA A, DATA AFSK,
USB.
Perhaps you don't have enough drive to the LIEN IN for 4 or 5 bars of
ALC? Or VOX iGN s not set high enough? Did you try the full range?
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
